An affordable and highly functional meter assembly for measuring yarn

Can be used from:

Spinning Wheel to Niddy Noddy
Swift to Ball Winder
Yarn Ball to Knitter
By Weavers

Will handle most yarn weights. It will even work with certain ribbon yarns.

Can be attached to a table, spinning wheel, loom, or other surface. The clamp mounting hole is off-center which allows you to reverse the meter position if there is interference on your table surface. The clamp can be removed and inserted into the other side to rotate the yarn guide slot to the opposite side.

Fits table thicknesses from 1/2" to 1-3/4" (it will even fit 2" thick tables if you remove the vinyl feet from the bottom of the meter).

Measures lengths in feet as opposed to yards and goes up to 999 feet -- and then continues from 000 again. A reset button allows the user to set back to 000 at any time.

Unit Size is 6" long by 2" wide and 3-1/4" high. The clamping block is made of a non-marring plastic and vinyl mounting pads are mounted on the underside of the wooden base.

Use with the Yarn Tensioner